User Guide

🪄 Before First Use

• Charge the device fully (takes about 4 hours)
• Make sure the water valve is closed before use

💧 Step 1: Fill the Water Tank

• Turn the water flow dial to the OFF position
• Open the lid and fill with clean warm water (36–38°C / 96–100°F)
• Do not exceed the MAX line (1000ml)
• Rotate the water tank to lock it securely onto the device

🧩 Step 2: Connect the Water-Delivery Tube

• Take out a single-use sterile water-delivery tube
• Insert the B end (short end) into the water outlet on the device
• The A end (long end) is designed for rectal insertion
• Apply water-based lubricant to the A end if needed for comfort

⚙️ Step 3: Power On & Pre-Rinse

• Sit comfortably on the toilet 🚽
• Press and hold the power button for 2–3 seconds to activate the device
• Turn on the water flow to gently rinse the anal area for about 5~10 seconds
• Then, gently insert the A end of the tube 3–5 cm into the rectum

🌊 Step 4: Begin Cleansing

• Choose your preferred water flow level (1–3)
• Once you feel comfortably full, stop the water flow

🚽 Step 5: Natural Evacuation

• Slowly remove the tube
• Allow the water and stool to be expelled naturally

🧼 Step 6: Clean & Store

• Discard the used water-delivery tube
• Rinse the water tank and wipe the device surface clean
• Let all parts air dry completely before storing in your EaseFlow carry bag

💡 All guide tubes are single-use. Do not reuse.
📦 Each EaseFlow set includes 10 disposable sterile guide tubes.