🇺🇸Start Here (English)

📘 Welcome to EaseFlow — Your Personal Water-Based Bowel Support System, a Gentle Enema Kit Designed for Comfortable, Natural Relief

🌹Thank you for choosing EaseFlow — a thoughtfully designed gentle enema kit that supports healthy bowel habits through warm, gentle water cleansing.

With EaseFlow, every trip to the bathroom becomes simpler, cleaner, and more comfortable.🍀

👉Let’s Flow it Easy — naturally, effortlessly, and with peace of mind. 💧

🪄 Before First Use

  • Fully charge the device (approximately 4 hours)
  • Ensure the water flow regulator is in the OFF position before use
  • Confirm that all components are properly assembled

🔗 Step 1: Connect the Water Tube

  • Connect the water tube to the water tank outlet
  • Ensure the connection is secure and leak-free
  • It is recommended to keep the tube connected after the initial setup to avoid frequent disassembly
  • Confirm the water flow regulator is in the OFF position

💧 Step 2: Fill with Warm Water

  • Open the top lid and fill with clean warm water
  • Recommended temperature: 96–100°F (36–38°C)
  • Do not exceed the maximum fill line (MAX – 1000 ml)
  • Attach and twist the upper unit securely onto the water tank

⚠️ Important Safety Notice (When Water Tank Is Filled)

  • Do not shake the device and always keep it upright on a flat surface
  • Do not lay the device flat, invert, or tilt it, as this may cause leakage or malfunction
  • When placing into the carrying case, keep the case upright before inserting the device
  • Secure the device in an upright position using the built-in fastening strap (Velcro)

🧩 Step 3: Attach the Disposable Tube

  • Remove a single-use disposable tube
  • Insert the B-end (short end) into the device outlet
  • The A-end (long end) is designed for rectal insertion
  • Apply a water-based lubricant to the A-end if needed for comfort

⚙️ Step 4: Power On & Pre-Rinse

  • Sit comfortably on the toilet 🚽
  • Press and hold the power button for 2–3 seconds to turn on the device
  • Open the flow regulator and gently rinse the anal area for 5–10 seconds
  • Slowly insert the tube approximately 3–5 cm

🌊 Step 5: Gentle Water Flow

  • Select the desired flow level (1–3 settings)
  • Stop the water flow when you feel comfortable, a sense of fullness, or the urge to evacuate

🚽 Step 6: Natural Release

  • Gently remove the tube
  • Allow water and waste to be expelled naturally

🧼 Step 7: Cleaning & Storage

  • Dispose of the used disposable tube (do not reuse)
  • Empty any remaining water from the tank
  • Wipe the exterior of the device clean
  • Allow all parts to dry completely before storing in the carrying case

💡 Helpful Tips

  • Keep the device dry after each use
  • Do not reuse disposable tubes
  • Use gently and avoid excessive force during operation

💡 Additional Reminder

  • When the device contains water, avoid shaking, tilting, laying flat, or inverting the device

⚠️ Warnings / Precautions

  • For rectal use only
  • Discontinue use and consult a healthcare professional if pain, bleeding, or discomfort occurs
  • Keep away from water during charging
  • Keep out of reach of children

🩺 Medical Disclaimer

EaseFlow is intended for personal hygiene and comfort support only. It is not intended to diagnose, treat, cure, or prevent any disease.
If you experience persistent or serious symptoms, please consult a qualified healthcare professional before use.

🗣️ Feedback

🗣️ Please share your experience with EaseFlow in the 「🗣️ Feedback ✍️」 section