How to Use EaseFlow

🪄 Before First Use

  • Charge the device fully (takes about 2 hours)
  • Make sure the water valve is closed before use

💧 Step 1: Fill with Warm Water

  • Open the lid and fill the tank with clean warm water (36–38°C / 96–100°F)
  • Do not exceed the MAX fill line
  • Secure the lid and insert the tank into the device

🧩 Step 2: Attach the Guide Tube

  • Insert the B-end of the disposable sterile guide tube into the water outlet
  • The A-end is designed for rectal insertion
  • Apply water-based lubricant if needed

⚙️ Step 3: Power On & Pre-Rinse

  • Turn on the device
  • Open the water valve to pre-rinse for 10 seconds
  • Gently insert the guide tube 3–5cm into the rectum

🌊 Step 4: Start Water Flow

  • Select your preferred water flow level
  • Stop once you feel comfortably full

🚽 Step 5: Evacuate Naturally

  • Remove the guide tube gently
  • Sit and allow water and stool to pass naturally

🧼 Step 6: Clean & Store

  • Discard the used guide tube
  • Rinse the water tank and wipe the device surface
  • Dry completely and store in a clean space

💡 All guide tubes are single-use. Do not reuse.
📦 Each EaseFlow set includes 10 disposable sterile guide tubes.